Skip to main content

CL_RACING AIO F4

Description​

  • F4 chip+ OSD + PDB + SD card adapter

MCU, Sensors and Features​

Hardware​

(Fill in hardware specs and add any not listed)

  • MCU: STM32F4
  • IMU: MPU-6000
  • IMU Interrupt:YES
  • BARO: NO
  • VCP: YES
  • Hardware UARTS: 4
  • OSD: uses a AB7456 chip
  • Blackbox: SD Card
  • PPM/UART NOT Shared: Yes
  • Battery Voltage Sensor: 10:1
  • Current sensor: 0.5 mOhm, 250 Current scale in the setting
  • Integrated Voltage Regulator: 1.2A 5v
  • build_in filterd 7.86v BEC FOR video tx (800mw MAX)and camera

Features​

  • CL_RACING F4 AIO borad has
  • onboard BEC
  • LC filter for camera and vtx.
  • All pads design no through hole pin header.
  • Betaflight OSD build in.
  • Current sensor
  • Build in Sbus inverter
  • 120A Continues current rated PDB. 160A burst for 10s

Manufacturers and Distributors​

Designers​

  • bnn1044

Maintainers​

  • bnn1044

Similar Targets​

  • 99% identical to OmnibusF4SD, Same input and output, but in PDB style motor layout
  • Function and features are the same as OmnibusF4SD, added more uarts and sepreate PPM from the uart

Variants​

Other Resources​

Setup Guide:

Image​